Honeywell HCD544/HCD544X/HCD545X Camera Quick Install Guide

The HCD544 Series camera is designed for general surveillance applications and is ideally suited for low-light indoor environments. The HCD544 Series camera is factory configured for a CS-mount lens. Screw the lens (customer supplied) into the front of the camera body. An IR corrected Day/Night lens is recommended for this camera.

The HCD544 camera is equipped with LAMP and GND external contact terminals (see Figure 2). When the LAMP terminal is connected to the GND terminal, the camera is forced into night mode (see DAY&NIGHT). It stays in night mode until the LAMP terminal is disconnected from the GND terminal.

There are mounting points on the top and bottom of the camera (see Figure 3) to mount the camera on a bracket or tripod. Use standard sized mounting bolts to install the camera to a mounting bracket.

Adjust the focus in your field of view until you see a clear image. If necessary, adjust the brightness using the OSD menu controls (see LENS DC/BRIGHTNESS or AGC). Confirm the exposure on the monitor screen.

Download PDF Manual Honeywell HCD544/HCD544X/HCD545X Camera Quick Install Guide